How to Mix Almost Any Color in Oil Painting: Hue, Value & Saturation Explained

One of the most important skills in oil painting is learning how to mix the exact color you see in your reference. While it might seem complicated at first, color mixing becomes much more manageable when you break it down into three simple properties: hue, value and saturation.
In this guide, I'll walk you through my approach to color mixing using three practical examples: matching the green of a leaf, the brown of a wooden handle, and the grey of my glass painting palette.
Let's get started!
Understanding the Three Properties of Color
Before mixing any color, it's important to understand what you're trying to achieve. Every color has three properties:
Hue: The color family. Is it red, yellow, blue, green, orange or violet?
Value: How light or dark the color is.
Saturation: How vivid or dull the color appears.
Whenever I look at a reference, I try to evaluate these three properties individually rather than guessing which paint colors to mix.
For this demonstration, I'm using four colors on my palette: Titanium White, Winsor Lemon, Cadmium Red and Ultramarine Blue.

1. Mixing Green: Start with the Hue
Let's start with something relatively straightforward: the green of a leaf.
The first question I ask myself is: what color family is this closest to?
In this case, it's clearly green, so I'll start by mixing yellow and blue.

Once I have my initial green, I look at which direction its hue needs to shift. Does it lean more towards yellow or blue? Looking at the reference, this particular green leans more towards blue, so I'll add a little more Ultramarine Blue.

Next, I evaluate the value. My mixture is still too light, so I'll add more blue to darken it.

Finally, we need to match the saturation. The green in the reference is relatively dull, so I'll desaturate my mixture using its complementary color: red

A useful tip: Always introduce new colors in small amounts. It's much easier to gradually adjust a mixture than to correct it after adding too much of another color.
With a few small adjustments, we have a green that's quite close to the reference!

Mixing a Lighter Green
Now let's match the lighter side of the leaf.
The hue is fairly similar, but the value is lighter. To achieve this, I'll add Titanium White along with a little yellow.

You can lighten a color using either white or yellow, but there's an important difference. Adding too much white can reduce saturation and make the mixture look chalky. Adding a little yellow alongside it helps retain some of that vibrancy.
After checking the mixture directly against the leaf, I make a couple of small adjustments until the color is close enough.

2. Mixing Brown: Understanding Complementary Colors
Now let's try something slightly different: matching the brown of a wooden handle.
Unlike green, brown isn't a straightforward starting point on the color wheel. But here's a useful way to think about it: Brown is essentially a dark, desaturated orange.
So I'll start by mixing yellow and red to create orange.

Once I have the orange, I'll desaturate it using its complementary color, green.
I'm using some of the green mixture we made earlier, adding it gradually until the orange starts turning brown.

There's an interesting reason why this works. Green is made by mixing yellow and blue. So when you combine green with orange, you're essentially mixing all three primary colors, which produces a muted, brownish color.
After getting the basic brown, I compare it against the wooden handle.

It's still a little too bright, so I'll add more green to desaturate it. I'll also introduce a tiny amount of blue to darken it.
With a few more adjustments, the brown is now a pretty close match!

An Easier Alternative: Using Earth Pigments
You don't always have to mix brown from three primary colors. Earth pigments such as Burnt Umber and Raw Sienna are excellent starting points for mixing browns and muted neutrals.
One advantage of earth pigments is that they're relatively inexpensive and can save you quite a bit of mixing time.
Both approaches can produce similar results. It's simply a matter of choosing the starting point that works best for you.

3. Mixing Grey: Getting the Temperature Right
We've mixed green and brown, so let's move on to something that can be surprisingly difficult: grey.
I like to start my grey mixtures using Ultramarine Blue and a brown, usually Burnt Umber or Raw Sienna.
For this demonstration, I'll use the brown mixture we already have.The reason I like this combination is that it gives me control over the temperature of the grey. Adding more blue makes it cooler, while adding more brown makes it warmer.
I'll start by adding white to lighten the mixture. Notice that I'm not using yellow to lighten it this time. Since my target grey is on the cooler side, I want to avoid introducing unnecessary warmth.

A common mistake is assuming that grey is simply a mixture of black and white. In reality, most greys aren't perfectly neutral. They tend to lean towards either warm or cool.
As I compare my mixture against the glass palette, I keep adjusting the temperature and value independently. A little more blue to cool it down, some white to lighten it.

In my experience, greys are among the more difficult colors to match because they're not only influenced by their own warm or cool bias, but also by their surroundings.
For example, a grey surface near green foliage might pick up subtle green reflections, while one next to a yellow wall might appear warmer.
And that's actually what makes grey interesting to paint. Introducing these subtle temperature variations instead of using one flat grey can make a painting look much more realistic.
Final Thoughts: A Systematic Approach to Color Mixing
he biggest takeaway from this exercise is that color mixing doesn't have to be guesswork.
Whenever you're trying to match a color, break it down into three questions:
Hue: What color family does it belong to, and which direction does it lean?
Value: Is it lighter or darker than my current mixture?
Saturation: Is it more vivid or more muted?
Work on these properties one at a time, make small adjustments, and constantly compare your mixture against the reference.
You won't always get the exact match on your first attempt, and that's perfectly normal. Color mixing is an iterative process, and the more you practise, the better you'll become at recognizing what a mixture needs.
Here, I am adding the core shadow using low-dark. This is the darkest shadow on the sphere.
Color Wheel for Oil Painting – Free Printable PDF
If you found this tutorial helpful, try this exercise yourself. And if you enjoyed the post, consider subscribing for more tutorials.
YouTube Video:














Comments